P S VISHWESHWARA
Articles written in Sadhana
Volume 44 Issue 4 April 2019 Article ID 0100
Simultaneous estimation of unknown parameters using a-priori knowledge for the estimation of interfacial heat transfer coefficient during solidification of Sn–5wt%Pb alloy—an ANN-driven Bayesian approach
The present methodology focuses on model reduction in which the prevalent one-dimensional transient heat conduction equation for a horizontal solidification of Sn–5wt%Pb alloy is replaced with Artificial Neural Network (ANN) in order to estimate the unknown constants present in the interfacial heat transfercoefficient correlation. As a novel approach, ANN-driven forward model is synergistically combined with Bayesian framework and Genetic algorithm to simultaneously estimate the unknown parameters and modellingerror. Gaussian noise is then added to the temperature distribution obtained using the forward approach to represent real-time experiments. The hallmark of the present work is to reduce the computational time of both the forward and the inverse methods and to simultaneously estimate the unknown parameters using a-priori engineering knowledge. The results of the present methodology prove that the simultaneous estimation of unknown parameters can be effectively obtained only with the use of Bayesian framework.
Volume 45 All articles Published: 27 March 2020 Article ID 0078
In this work, natural convection fin experiments are performed with mild steel as the fin and an aluminium plate as base. The dimension of the mild steel fin is 250 mm 9 150 mm 9 6 mm and the aluminium base plate is 250 mm 9 150 mm 9 8 mm. A heater is provided on one side of the aluminium base plate and themild steel fin emerges on the other side of the plate. The heater provides required heat flux to the fin base; several steady-state natural convection experiments are performed for different heat fluxes and correspondingtemperature distributions are recorded using thermocouples at different locations of the fin. In addition, a numerical model is developed that contains the dimensions of the fin set-up along with extended domain to capture the information of the fluid. Air is treated as a working fluid that enters the extended domain and absorbs heat from the heated fin. The temperature and the velocity of the fluid in the extended domain are obtained by solving the Navier–Stokes equation. The numerical model is now treated as a forward model that provides the temperature distribution of the fin for a given heat flux. An inverse problem is proposed to determine the heat flux that leads to the temperature distributions during experiments. The temperature distributions of the experiments and forward model are compared to identify the unknown heat flux. In order to reduce computational cost of the inverse problem the forward model is then replaced with artificial neural network (ANN) as data reduction, which is developed using several computational fluid dynamics solutions, and the inverse estimation is accomplished. The results indicate that a quick solution can be obtained using ANN with a limited number of experiments.