• Ananda Behera

      Articles written in Sadhana

    • Design, fabrication, testing and packaging of a silicon micromachined radio frequency microelectromechanical series (RF MEMS) switch

      M S Giridhar Ashwini Jambhalikar Jiju John R Islam Ananda Behera C L Nagendra George Thachil M P Srikanth Shailesh Somani B H M Darukesha Srinivasarao Bollu

      More Details Abstract Fulltext PDF

      RF characterization and packaging of a single pole single throw (SPST) direct contact microelectromechanical (MEMS) series radio frequency (RF) switch is reported. Precise thickness of the silicon MEMS structure is achieved using a specially developed silicon Deep Reactive Ion Etching (DRIE) thinning process. A stress free release process is employed which ensures a high yield of released microstructures. The design of the device is based on stiffness equations derived from first principles. Displacement of the actuator under applied field is measured to confirm electrostatic pull in, which occurs in the 30–50 V range. The variation of contact resistance with time has been measured and is found to have a power law decay, in agreement with theoretical models. At the bare die level the insertion loss, return loss and the isolation of the switch were measured to be −0.43 dB, −25 dB and −21 dB, respectively at 10 GHz. The devices were packaged in commercially available RF packages and mounted in alumina boards for post package characterization. Due to the presence of bond wires in the signal path of the packaged devices, the RF performance was found to degrade at high frequencies. However, losses were measured to be at acceptable levels up to 2 GHz. Factors contributing to insertion loss at the die and package device levels are discussed in detail with possible solutions.

  • Sadhana | News

    • Editorial Note on Continuous Article Publication

      Posted on July 25, 2019

      Click here for Editorial Note on CAP Mode

© 2022-2023 Indian Academy of Sciences, Bengaluru.