Articles written in Journal of Astrophysics and Astronomy
Volume 40 Issue 3 June 2019 Article ID 0024
We present a process for thermal forming of thin glass panels of borosilicate glass to produce mirror segments for X-ray telescope optics. The mirror segments are required to be shaped in a parabolic and hyperbolic shape in accordance with Wolter-I type design of X-ray telescope optics. Thermal forming of glass is a low-cost method to produce light-weight mirror segments. The process makes use of a semi-cylindrical quartz mold having surface roughness of the order of 1 nm. Flat glass sheets of 0.2 mm and 0.3 mm thickness are placedon the diametric edges of the mold. With a suitable thermal cycle, the glass sheets are thermally formed as per the shape of the mold. The shape of these formed glass sheets was measured using a non-contact optical setup.The surface quality measurements of the formed glass sheets were performed using atomic force microscope and they were found to be in the range of 0.04–0.33 nm. Once tested for acceptance, these glass sheets are coatedusing sputter deposition of multi-layers of high and low atomic number materials for hard X-ray reflection. Such mirror segments do not require polishing of the surface before being coated with multi-layers.
Volume 40 | Issue 5
Since January 2016, the Journal of Astrophysics and Astronomy has moved to Continuous Article Publishing (CAP) mode. This means that each accepted article is being published immediately online with DOI and article citation ID with starting page number 1. Articles are also visible in Web of Science immediately. All these have helped shorten the publication time and have improved the visibility of the articles.
Click here for Editorial Note on CAP Mode