Articles written in Journal of Chemical Sciences
Volume 131 Issue 9 September 2019 Article ID 0099
Water splitting by Sulfur–Iodine (S–I) cycle is one of the promising thermochemical processes for hydrogen production due to its high efficiency. The decomposition of H2SO4 to produce SO2 is the reaction with the highest energy demand in the S–I cycle and it shows a large kinetic barrier. Sulfuric acid ishighly corrosive and its endothermic decomposition needs elevated temperatures (>800 ºC). Henceforth, before the scale-up of the process plant there is a need to explore various materials of construction under very harsh acidic environments and phase changing conditions. Corrosion studies on some of the possible materials of construction (SS-304, SS-310, SS-316, Inconel-800, Alloy-20, Inconel-600, Incoloy-800H, Hastelloy C-276) were performed in detail and the most corrosion resistant material is suggested for the construction of sulfuric acid decomposition unit. The studies were performed at low temperatures (60ºC and 120ºC) as well as at high temperatures (700ºC, 800ºC and 900ºC). The corrosion rates were determined using weight loss method at low as well as high temperature and by using electrochemical method at low temperature (80ºC). The phase changing condition was more severe and resulted in higher corrosion rate. Hastelloy C-276 showed the least corrosion rate.
Volume 134, 2022
Continuous Article Publishing mode
Click here for Editorial Note on CAP Mode