Articles written in Bulletin of Materials Science
Volume 34 Issue 4 July 2011 pp 615-622
We describe in this paper a transparent conducting film (TCF). It is a fibrous layer of multiwalled carbon nanotubes (MWNTs), labeled a dilute CNT mat, that was prepared and unidirectionally stretched to improve both the optical and electrical properties. After stretching by 80% strain, transmittance at 550 nm wavelength was improved by 37% and sheet resistance was reduced to 71% of the original value. The improvement of the transmittance can be explained by increased area of the CNT mat after stretch, and the reduced sheet resistance can be explained by increased density of the CNT alignment in lateral direction due to contraction. Based on the microscopic observation before and after stretch, models to describe the phenomena are proposed. By further expanding on this method, it may be possible to obtain a transparent conducting carbon nanotube film which is crack-resistant for solar cell applications.
Volume 34 Issue 4 July 2011 pp 623-628
Vacuum filtration process to fabricate a transparent conducting carbon nanotube (CNT) film is reported. A CNT mat, which is a fibrous sheet of long multi-walled carbon nanotubes (MWNT), was prepared and dispersed in oleum by solution-sonication. The suspension was then vacuum filtered to obtain a thin MWNT layer with improved dispersion. Sheet resistance of the obtained MWNT layer was increased despite the improved dispersion. SEM micrographs and energy dispersive spectroscopy results indicated that the increase of the sheet resistance could be attributed to degradation and oxidation of the MWNT bundles. Though the chemical approach in this study did not improve the electrical property of the CNT mat, a mechanical approach proposed in our recent work was deemed suitable to enhance optical and electrical properties of the CNT mat.
Volume 42 | Issue 5
Click here for Editorial Note on CAP Mode