Articles written in Bulletin of Materials Science
Volume 37 Issue 1 February 2014 pp 83-93
The present approach is on the modification of viscosity fitting of undercooled liquid as a function of undercooling. The method consists of finding analytical solution of three arbitrary constants of the Vogel–Fulcher–Tamman (VFT) equation by choosing three viscosity data at three critical temperatures for an undercooled liquid. Three critical temperatures are liquidus temperature (𝑇l), crystallization onset temperature (𝑇x) and glass transition temperature (𝑇g). The experimental viscosity data at or very near to these three critical temperatures (depending on the availability in literature) have been utilized to achieve the analytical solution. The analytical solution of VFT equation is further examined by selecting the experimental data points away from the critical temperatures in order to check their (𝑇l, 𝑇x and 𝑇g) significance towards the solution. Total absolute error (TAE) and total squared error (TSE) values obtained from the present method with respect to the experimental viscosity data in the temperature range between 𝑇l and 𝑇g are very much comparable and in most of the cases lower than that of existing `best-fit' cited in the literature for a number of glassy alloys. Moreover, this method interestingly enables us to find the fragility parameters for a number of glassy alloys and convincingly explain their true glass forming abilities (GFA).
Volume 37 Issue 4 June 2014 pp 743-752
Present work deals with the preparation of spark plasma-sintered Cu–Zn aggregate (5, 10 and 20 wt% Zn) with interfacial bonding only starting from elemental powders of Cu and Zn (99.9% purity) and subsequently making of porous template of Cu by dezincification. Sintering is done so as to achieve only interfacial bonding with the aim to maintain maximum potential difference between the Cu and Zn particles during dezincification process in various solutions, viz. 1 N HCl and 3.5 wt% NaCl solutions. X-ray diffraction, optical microscopy and SEM–EDS are carried out to examine microstructural evolution and subsequent changes in hardness with sintering temperatures and different Zn percentages. Dezincification and pore formation are conducted on sintered 0.5 mm thick 12 mm diameter disc samples. The size, distribution and nature of pores in porous templates of Cu are then investigated using optical microscopy and SEM–EDS analysis.
Volume 37 Issue 6 October 2014 pp 1353-1367
A novel approach is followed to successfully fabricate nanoporous thin Ag template using partial sintering of elemental Ag and Zn (both have 99.9% purity) and subsequent dezincification. The starting materials for dezincification are partially sintered Ag–Zn aggregates (2.5, 5 and 10 wt% Zn). Partial sintering is done in order to achieve only interfacial bonding with the aim to maintain maximum potential difference between Ag and Zn particles during dezincification process in 1 N HCl and 3.5 wt% NaCl solutions. Two different dissolution methods, namely, simple immersion for 45 days and electrochemical way (holding the sample at critical potential), are employed. Electrochemical polarization tests are carried out to determine the critical potential for subsequent chrono-amperometry. X-ray diffraction, optical microscopy, scanning electron microscopy and energy dispersive X-ray spectroscopy are carried out to examine microstructural evolution, size, distribution and nature of pores in sintered aggregate as well as in template.
Volume 44, 2021
Continuous Article Publishing mode
Prof. Subi Jacob George — Jawaharlal Nehru Centre for Advanced Scientific Research, Jakkur, Bengaluru
Chemical Sciences 2020
Prof. Surajit Dhara — School of Physics, University of Hyderabad, Hyderabad
Physical Sciences 2020
Click here for Editorial Note on CAP Mode