R R UDAWANT
Articles written in Bulletin of Materials Science
Volume 43 All articles Published: 23 June 2020 Article ID 0154
Electroplated Co$_3$O$_4$ selective coatings for high-temperature solar thermal applications
R R UDAWANT M G TAKWALE S V GHAISAS K C MOHITE
This communication presents the optical characterization of Co$_3$O$_4$ films electroplated on Cu- and Ni-coated Cu substrates. Co$_3$O$_4$ films were successfully deposited by using the electrochemical deposition method with cobalt acetate tetrahydrate as a cobalt precursor followed by annealing at 350$^{\circ}$C. The as-prepared films were characterized using X-raydiffraction, UV–visible spectroscopy, Fourier transform infrared spectroscopy, scanning electron microscopy and stagnation temperature test.The characterization shows the presence of only the cubic spinal Co$_3$O$_4$ phase in all films. The morphological analysis revealed the generation of unique fish-shaped Co$_3$O$_4$ particles with uniform size distribution for the films obtained on the Ni-coated Cu substrate. The Cu substrate with and without nickel plating used for deposition has shown a profound effect on the optical characteristics of films. The solar absorbance as high as 0.96 and thermal emittance as low as 0.02 were obtained for the films deposited on the Ni-coated Cu substrate. The highest value of the figure of merit ($F_1$) of $\sim$0.34 and extrapolated stagnation temperature of $\sim$362$^{\circ}$C were realized for films having better optical characteristics. The results obtained indicate very good potential of the deposited films for solar thermal applications.
Volume 46, 2023
All articles
Continuous Article Publishing mode
Prof. Subi Jacob George — Jawaharlal Nehru Centre for Advanced Scientific Research, Jakkur, Bengaluru
Chemical Sciences 2020
Prof. Surajit Dhara — School of Physics, University of Hyderabad, Hyderabad
Physical Sciences 2020
Click here for Editorial Note on CAP Mode
© 2023-2024 Indian Academy of Sciences, Bengaluru.