Articles written in Bulletin of Materials Science
Volume 34 Issue 1 February 2011 pp 75-79
Microwave absorption of composites containing activated carbon fibres (ACFs) was investigated. The results show that the absorptivity greatly depends on increasing ACF content in the absorbing layer, first increasing and then decreasing. When the content is 0.76 wt.%, the bandwidth below −10dB is 12.2 GHz. Comparing the absorption characteristics of the ACF composite with one containing unactivated fibres, it is found that carbon fibre activation increases the absorption of the composite.
Volume 36 Issue 2 April 2013 pp 213-216
A mass of hollow carbon nanospheres (HCNSs) was fabricated by chemical vapour deposition of methane over Ni/Al2O3 catalyst at 600 °C. The products were characterized with high-resolution transmission electron microscope images, and the results showed that the external diameter of the HCNSs was 5–90nm and the thickness of wall was about 10 nm. Microwave absorption of HCNSs/paraffin composites was mainly attributed to dielectric loss. The microwave-absorbing peaks of composites containing HCNSs shifts to low frequencies, and the bandwidth below −10 dB and minimum RL decrease with increasing thickness of HCNSs/paraffin composites.
Volume 43, 2020
Continuous Article Publishing mode
Click here for Editorial Note on CAP Mode