• Manu Krishnan

      Articles written in Bulletin of Materials Science

    • Phase transitions in coated nickel titanium arch wires: A differential scanning calorimetric and X-ray diffraction analysis

      Manu Krishnan S Seema K Sukumaran Vasant Pawar

      More Details Abstract Fulltext PDF

      Shape memory and super-elastic properties of orthodontic nickel titanium wires, which are crucial for its clinical performance are dependent on the austenitic–martensitic phase transitions in its metallic microstructure that happen as a result of temperature or stress. The objective of this study was to compare the austenitic–martensitic phase transitions in new, black oxide coated nickel titanium (0.016 inch, Black Diamond, NiTi) arch wires in the `as-received’ form, from the manufacturer and `retrieved form’ after two months of intraoral use. This was done to analyse whether the new oxide coated nickel titanium wires suffered any significant loss in shape memory and super elasticity properties at the end of two months of intra oral use, findings of which could give valuable inferences prior to its widespread application in clinical practice.

      Five arch wire samples in both groups were investigated for their austenitic–martensitic phase transitions in an in vitro set up, using differential scanning calorimetry (DSC), (−90° to 100°C at a rate of 10°C/min) and X-ray diffraction (XRD) analysis (10° to 90°), as a function of temperature. Martensitic–austenitic thermograms showed an intermediate rhombohedral phase in the heating cycle of both groups, but cooling cycles showed direct reversal from austenitic to martensitic phase. Lower austenitic start (𝐴s = 10.78 ± 0.46° C) and finish (𝐴f = 22.26 ± 0.24° C) temperatures of coated wires compared to the conventional wires showed

      ability of the wire to remain in austenitic phase below oral temperature, that permits it to take up greater force during activation,

      increased springiness and

      consistent force delivery for an extended period of time.

      Statistical analysis with paired Student’s `𝑡’ test did not show any significant difference in mean values of transition temperatures and enthalpies between the two groups which proved similar shape memory and super-elastic properties at the end of intra oral use. Black oxide coating of NiTi wires may, therefore, be effective in diversified oral conditions and may find acceptable for re-use after sterilization. Low enthalpy values (0.92–3.59 j/g) compared to conventional ones, implied complete phase transition at the atomic level that can improve performance of the material in activation and deactivation cycles of NiTi wires. X-ray diffraction analysis of the two groups demonstrated predominance of austenitic phases (A, 110, 220 and 211) with complete reversibility at the atomic level. Discrete crystallographic structure and absence of multiple phases showed complete martensitic–austenitic transition, which authenticated the differential scanning calorimetric findings. This can earn acceptance for the new product in contemporary orthodontic practice with adequate scope for indigenization.

  • Bulletin of Materials Science | News

    • Editorial Note on Continuous Article Publication

      Posted on July 25, 2019

      Click here for Editorial Note on CAP Mode

© 2017-2019 Indian Academy of Sciences, Bengaluru.