Guang Sheng Cao
Articles written in Bulletin of Materials Science
Volume 34 Issue 4 July 2011 pp 973-977
Hierarchical 𝛽-Co(OH)2 microspheres with 20–50 𝜇m diameter assembled from nanoplate building blocks were successfully fabricated via a hydrothermal process in the presence of a cation surfactant cetyltrimethylammonium bromide (CTAB). The products are characterized in detail by multiform techniques: X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray analysis. The effect of CTAB and pH value on the 𝛽-Co(OH)2 morphology was also investigated. When pH value is maintained at 9, an appropriate added amount of CTAB (3 g) is the crucial prerequisite for the formation of this interesting morphology. In this experiment, pH value of the solution and the cation surfactant CTAB together results in the formation of hierarchical 𝛽-Co(OH)2 microsphere structures assembled from nanoplates.
Volume 34 Issue 6 October 2011 pp 1185-1188
In this paper, Te/C nanocables were fabricated by a hydrothermal method in the presence of cetyltrimethylammonium bromide (CTAB). The products were characterized in detail by multiform techniques: transmission electron microscopy, X-ray diffraction, energy-dispersive X-ray analysis and Fourier transform infrared (FTIR) spectroscopy. The results showed that the products were nanocables with lengths of several microns, core about 20 nm in diameter, and a surrounding sheath of about 60–80 nm in thickness. Te/C nanocables were tailored freely by chemical etching. Carbonaceous nanotubes and Te/C nanocables with fragmentary Te core were obtained by adjusting time of chemical etching.
Volume 37 Issue 6 October 2014 pp 1369-1373
The Co3O4 nanocubes were prepared by using hydrogen peroxide (H2O2) as oxidant, Co(NO3)2. 6H2O as a cobalt source. The products were characterized in detail by multiform techniques: scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD). The prepared Co3O4 nanocubes were applied to study the electrocatalytic reduction of hydrogen peroxide (H2O2) in 0.01 M pH 7.0 phosphate buffer medium. The Co3O4 nanocubes exhibit remarkable electrocatalytic activity for H2O2 reduction. Furthermore, the obtained Co3O4 nanocubes have been employed as electrode materials for electrochemical sensing H2O2.
Volume 38 Issue 1 February 2015 pp 163-167
The Fe3O4–Fe2O3 nanocomposites were prepared by the co-precipitation method and followed by calcination process. The products were synthesized and characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy and energy-dispersive X-ray analysis. The obtained Fe3O4–Fe2O3 nanocomposites were then applied to study the electrocatalytic reduction of hydrogen peroxide (H2O2) in 0.01 M pH 7.0 phosphate buffer medium. Then the Fe3O4–Fe2O3 nanocomposites were used as active electrode material of electrochemical sensors for H2O2 detection The detection sensitivity of the sensor was 20.325 𝜇A mM-1, and the detection limit was estimated to be about 0.2 mM.
Volume 46, 2023
Continuous Article Publishing mode
Prof. Subi Jacob George — Jawaharlal Nehru Centre for Advanced Scientific Research, Jakkur, Bengaluru
Chemical Sciences 2020
Prof. Surajit Dhara — School of Physics, University of Hyderabad, Hyderabad
Physical Sciences 2020
Click here for Editorial Note on CAP Mode