• EZEDDIN MOHAJERANI

      Articles written in Bulletin of Materials Science

    • Studying the change in organic light-emitting diode performance at various vacuum-deposition rates of hole and electron transport layers

      AMIR MIKAEILI EZEDDIN MOHAJERANI

      More Details Abstract Fulltext PDF

      The electroluminescence (EL) of classic and thermally activated delayed fluorescence (TADF) organic light emitting diodes (OLEDs) at various vacuum-deposition rates of hole and electron transport layer (HTL and ETL) has beenstudied. The external quantum efficiency (EQE) measurements showed that the best performance devices were those with a high charge carrier balance inside the emitting layer, which was engineered using hole and electron current manipulation as a result of vacuum-deposition rate control. Changing the vacuum-deposition rate of HTL and ETL leads to a change in the maximum EQE (EQE$_{\rm max}$) of the classic and TADF OLEDs without obvious changes in EQE roll-off ratio at high current density. We used a simple analytical model to clarify that the enhanced hole current in HTL at high deposition rates is dominated by high hole mobility attributed to the increased hole hopping rate due to the reduction of the intermolecular separation between horizontally oriented $N,N'$-diphenyl-$N,N'$-bis(1-naphthyl)-1,1$'$-biphenyl-4,4$'$-diamine($\alpha$-NPD) molecules. The increase in the electron current of tris-(8-hydroxyquinoline) aluminium (Alq$_3$) ETL at low deposition rate was ascribed to high electron injection from cathode into ETL by the fabrication and comparison of $J–V$ characteristic of two electron-only devices with a difference at deposition rate of ETL near cathode interface. Finally, we introduced an OLED with novel gradient and barrier structures for the emitting layer in which high injected charge carriers recombined inside added recombination zone to raise radiative recombination and efficiency of the device. Our results demonstrated that EL efficiency of an OLED can be changed by controlling the vacuum-deposition rate of organic layers.

  • Bulletin of Materials Science | News

    • Dr Shanti Swarup Bhatnagar for Science and Technology

      Posted on October 12, 2020

      Prof. Subi Jacob George — Jawaharlal Nehru Centre for Advanced Scientific Research, Jakkur, Bengaluru
      Chemical Sciences 2020

      Prof. Surajit Dhara — School of Physics, University of Hyderabad, Hyderabad
      Physical Sciences 2020

    • Editorial Note on Continuous Article Publication

      Posted on July 25, 2019

      Click here for Editorial Note on CAP Mode

© 2017-2019 Indian Academy of Sciences, Bengaluru.