• Fulltext

       

        Click here to view fulltext PDF


      Permanent link:
      https://www.ias.ac.in/article/fulltext/sadh/045/0280

    • Keywords

       

      Cement composites; heat of hydration; TiO2 nanoparticles; permeability; sorptivity; bond strength

    • Abstract

       

      The utilization of nanoparticle-blended cement while producing concrete or mortar is gaining immense significance nowadays, mainly on account of the improvements in the long-term durability characteristics of the composites. The feasibility of using cement blended with nano-TiO2 particles to produce lesspermeable or impermeable mortar and concrete of sufficient strength and durability requirements was investigated in the present study. The composite cement includes Ordinary Portland Cement replaced with TiO2 nanoparticles at 0%, 2%, 4%, 6%, 8% and 10% quantities by weight. The properties studied include heat of hydration, compressive strength, bond strength, water absorption, permeability and sorptivity of mortar or concrete specimens. The roughness and surface defects of coarse aggregates greatly alleviated due to the incorporation of nano-TiO2 particles in concrete specimens. The rate of heat evolution increased during early stages of hydration owing to the high fineness and additional reactive surfaces induced from the nano-TiO2 particles blended in cementitious composite. Additionally, with reference to strength and durability characteristics, the nano-TiO2-blended composites performed relatively better than the control samples. The role of blended nano-TiO2 cement composites in reducing the interconnected matrix porosity of concrete is discussed briefly, providing evidences from scanning electron microscope (SEM) observations

    • Author Affiliations

       

      SUJAY RAGHAVENDRA NAGANNA1 2 K JAYAKESH3 2 V R ANAND4 2

      1. Department of Civil Engineering, Siddaganga Institute of Technology, Tumakuru 572 103, India
      2. Department of Civil Engineering, Shri Madhwa Vadiraja Institute of Technology and Management, Bantakal, Udupi 574 115, India
      3. Department of Civil Engineering, Amrita School of Engineering, Amrita Vishwa Vidyapeetham, Amritanagar, Coimbatore 641 112, India
      4. Department of Civil Engineering, Vivekananda College of Engineering and Technology, Puttur 574 203, India
    • Dates

       
  • Sadhana | News

    • Editorial Note on Continuous Article Publication

      Posted on July 25, 2019

      Click here for Editorial Note on CAP Mode

© 2021-2022 Indian Academy of Sciences, Bengaluru.