• Optimal design of spindle-tool system for improving the dynamic stability in end-milling process

    • Fulltext

       

        Click here to view fulltext PDF


      Permanent link:
      https://www.ias.ac.in/article/fulltext/sadh/045/0055

    • Keywords

       

      Frequency response; spindle design; milling stability; average stable depth of cut; design of experiments (DOE); meta-heuristic optimization.

    • Abstract

       

      This paper presents an optimum design approach of a spindle-tool system to improvise the dynamic stability of end-milling. Initially, the tool-tip frequency response function is obtained by analyzing the spindletool assembly with the finite element model. The chatter-free regions are maximized using an optimizationmethodology by considering the spindle and tool parameters as design variables. A simulated experimental dynamic data consisting of the average stable depth of cut is obtained for different combinations of design variables by the method of design of experiments (DOE) and analysis of variance technique is applied to find the influence of design parameters on the outputs. Based on the obtained results, the data is generalized with the help of a neural network model that works as an estimator of the average stable depths for the optimization module. The average stable depth of cut over a range of operating speeds is maximized by selecting optimal tool and spindle parameters.

    • Author Affiliations

       

      JAKEER HUSSAIN SHAIK1 J SRINIVAS2

      1. Department of Mechanical Engineering, KKR and KSR Institute of Technology and Sciences, Guntur, India
      2. Department of Mechanical Engineering, National Institute of Technology, Rourkela, India
    • Dates

       
  • Sadhana | News

    • Editorial Note on Continuous Article Publication

      Posted on July 25, 2019

      Click here for Editorial Note on CAP Mode

© 2021-2022 Indian Academy of Sciences, Bengaluru.