• Fulltext

       

        Click here to view fulltext PDF


      Permanent link:
      https://www.ias.ac.in/article/fulltext/sadh/038/04/0687-0706

    • Keywords

       

      Drilling; tool wear; thrust force; surface roughness; vegetable-based cutting fluid.

    • Abstract

       

      This study focuses on both formulation of vegetable-based cutting fluids (VBCFs) and machining with these cutting fluids. For this purpose, characterizations of chemical and physical analyses of these formulated cutting fluids are carried out. In this study, performances of three VBCFs developed from crude sunflower oil, refined sunflower oil, refined canola oil and commercial semi-synthetic cutting fluid are compared in terms of tool wear, thrust force and surface roughness during drilling of AISI 304 austenitic stainless steel with HSSE tool. Experimental results show that canolabased cutting fluid gives the best performance due to its higher lubricant properties with respect to other cutting fluids at the constant cutting conditions (spindle speed of 750 rpm and feed rate of 0.1 mm/rev).

    • Author Affiliations

       

      Babur Ozcelik1 Emel Kuram1 Erhan Demirbas2 Emrah Şik2

      1. Department of Mechanical Engineering, Gebze Institute of Technology, 41400 Gebze-Kocaeli, Turkey
      2. Department of Chemistry, Gebze Institute of Technology, 41400 Gebze-Kocaeli, Turkey
    • Dates

       
  • Sadhana | News

    • Editorial Note on Continuous Article Publication

      Posted on July 25, 2019

      Click here for Editorial Note on CAP Mode

© 2017-2019 Indian Academy of Sciences, Bengaluru.