• The temperature dependence of the magnetoelastic characteristics of cores for force sensors utilizing Fe70Ni8Si10B12 amorphous alloy

    • Fulltext

       

        Click here to view fulltext PDF


      Permanent link:
      https://www.ias.ac.in/article/fulltext/pram/071/03/0591-0597

    • Keywords

       

      Magnetoelastic effect; amorphous alloys; temperature.

    • Abstract

       

      This paper presents the results of investigation on the influence of temperature on magnetoelastic characteristics of the two ring-shaped cores, made of Fe70Ni8Si10B12 amorphous alloy. The cores were annealed for 1 h at 350 and 400° C, respectively. The compressive force 𝐹 was applied perpendicular to the direction of the magnetizing field 𝐻 in the sample. Special cylindrical backing enables application of the uniform compressive stress 𝜎 to the wound ring sample. A resistive furnace heated the experimental set-up. Results presented in the paper indicate a significant influence of the temperature on the magnetoelastic characteristics of Fe70Ni8Si10B12 amorphous alloy. Information about the magnetoelastic characteristics of this material may be useful in the magnetoelastic sensor development. Also this will create new possibilities in the development of physical model of magnetoelastic effect.

    • Author Affiliations

       

      Roman Szewczyk1 Adam Bieńkowski2 Jacek Salach2

      1. Industrial Research Institute for Automation and Measurements, Al. Jerozolimskie 202, 02-486 Warszawa, Poland
      2. Institute of Metrology and Measuring Systems, Warsaw University of Technology, sw. A Boboli 8, 02-525 Warszawa, Poland
    • Dates

       
  • Pramana – Journal of Physics | News

    • Editorial Note on Continuous Article Publication

      Posted on July 25, 2019

      Click here for Editorial Note on CAP Mode

© 2017-2019 Indian Academy of Sciences, Bengaluru.