Preparation and tribological behaviours of graphite self-lubricating coating deposited on middle carbon steel by electrospark deposition
TONGKUN CAO ZHUANG LV WEI ZHANG WEIFENG ZHANG
Click here to view fulltext PDF
Permanent link:
https://www.ias.ac.in/article/fulltext/boms/045/0102
To enhance the tribological performance of the self-lubricating coating, graphite self-lubricating coatings were deposited on middle carbon steel using electrospark deposition (ESD). The microstructure and components have been investigated by scanning electron microscopy images and energy dispersive X-ray spectroscopy analysis. Tribological experiments were carried out on a reciprocating type pin-on-disc tribometer at 5–20 N loads and 200–500 t min$^{–1}$ reciprocating frequency. Results indicated that there was a transition layer between coating and substrate, which should have a thin harder layer at a certain position and can increase the tribological properties of the coating. The graphite coating had better anti-friction and anti-wear performance than uncoated middle carbon steel. The worn surfaces showed that the wear mechanism was changed for graphite coating compared with uncoated middle carbon steel. The wear mechanism of the graphite coating changed from the single abrasive wear to the coexistence of abrasive wear andadhesive wear when reciprocating frequency and load from low to high.
TONGKUN CAO1 ZHUANG LV WEI ZHANG WEIFENG ZHANG
Volume 46, 2023
All articles
Continuous Article Publishing mode
Prof. Subi Jacob George — Jawaharlal Nehru Centre for Advanced Scientific Research, Jakkur, Bengaluru
Chemical Sciences 2020
Prof. Surajit Dhara — School of Physics, University of Hyderabad, Hyderabad
Physical Sciences 2020
Click here for Editorial Note on CAP Mode
© 2022-2023 Indian Academy of Sciences, Bengaluru.