• Fulltext

       

        Click here to view fulltext PDF


      Permanent link:
      https://www.ias.ac.in/article/fulltext/boms/043/0088

    • Keywords

       

      Thermal cycling; mechanical properties; thermal properties; basalt fibre; epoxy.

    • Abstract

       

      Current study investigated the effect of thermal fatigue on mechanical and thermal properties of basalt fibrereinforced polymer (BFRP) composites. To this, basalt fibre textiles in $2/2$ twill pattern was used to fabricate BFRPcomposites. Thermal cycling experiment was carried out between $−$40 and $+$120$^{\circ}$C for 20, 40, 60, 80 and 120 cycles. Moreover, dynamic mechanical analyzer (DMA) was used to evaluate the effect of thermal cycling on thermal properties of BFRPs. Moreover, we compared the extracted viscoelastic characteristics, such as storage modulus, loss modulus and loss factor curves with original thermal-treated BFRP specimens. Based on the results, thermal cycling affected the characteristics of composites in the post-curing stage due to an increase in temperature. Finally, the effect of thermal cycling on waterabsorption properties of BFRP composites was examined by hydrophobicity test. The results showed that tensile strength, flexural modulus and ILSS values increased with the increase in the number of cycles up to 80 cycles. In other words, an increase in the number of cycles increased the hydrophobicity of BFRP composites by decreasing the contact angles. Finally, the mechanical properties of tested composites were significantly decreased when the number of cycles reached 120. This was due to the mismatch of thermal expansion coefficient and long crack formation in the structure of composite.

    • Author Affiliations

       

      FARZIN AZIMPOUR-SHISHEVAN1 HAMIT AKBULUT1 M A MOHTADI-BONAB2

      1. Department of Mechanical Engineering, Faculty of Maragheh, Maragheh Branch, Technical and Vocational University, Tehran, Iran
      2. Department of Mechanical Engineering, University of Bonab, Velayat Highway, Bonab, Iran
    • Dates

       
  • Bulletin of Materials Science | News

    • Dr Shanti Swarup Bhatnagar for Science and Technology

      Posted on October 12, 2020

      Prof. Subi Jacob George — Jawaharlal Nehru Centre for Advanced Scientific Research, Jakkur, Bengaluru
      Chemical Sciences 2020

      Prof. Surajit Dhara — School of Physics, University of Hyderabad, Hyderabad
      Physical Sciences 2020

    • Editorial Note on Continuous Article Publication

      Posted on July 25, 2019

      Click here for Editorial Note on CAP Mode

© 2017-2019 Indian Academy of Sciences, Bengaluru.