• Fulltext

       

        Click here to view fulltext PDF


      Permanent link:
      https://www.ias.ac.in/article/fulltext/boms/036/03/0447-0456

    • Keywords

       

      Powders; processing; particle morphology; microwave sintering; densification; mechanical properties.

    • Abstract

       

      The powder characteristics of metallic powders play a key role during sintering. Densification and mechanical properties were also influenced by it. The current study examines the effect of heating mode on densification, microstructure, phase compositions and properties of Fe, Fe–2Cu and Fe–2Cu–0.8C systems. The compacts were heated in 2.45 GHz microwave sintering furnaces under forming gas (95%N2–5%H2) at 1120 °C for 60 min. Results of densification, mechanical properties and microstructural development of the microwave-sintered samples were reported and critically analysed in terms of various powder processing steps.

    • Author Affiliations

       

      Raja Annamalai1 Anish Upadhyaya1 Dinesh Agrawal2

      1. Department of Materials Science and Engineering, Indian Institute of Technology Kanpur, Kanpur 208 016, India
      2. The Pennsylvania State University, University Park, PA 16802, USA
    • Dates

       
  • Bulletin of Materials Science | News

    • Editorial Note on Continuous Article Publication

      Posted on July 25, 2019

      Click here for Editorial Note on CAP Mode

© 2017-2019 Indian Academy of Sciences, Bengaluru.