Bulletin of Materials Science
Volume 30, No. 4, August 2007
CONTENTS
Cover: Al–1×5 wt %Cu cooled at 40°C min–1 from above the liquidus to 588°C and held isothermally for 3 h before quenching. For details, see p. 404.
|
Biomaterials |
|
|
Adhesive B-doped DLC films on biomedical alloys used for bone fixation |
|
| *Characteristics of porous zirconia coated with hydroxyapatite as human bones | |
|
V V Narulkar, S Prakash and K Chandra * This
paper has been withdrawn by
Bulletin of Materials
Science as the editor has determined that the material presented in
this paper is a complete copy of the material which has been published
earlier by another authors in another journals.
|
309 |
| |
|
|
Thin Films |
|
|
Optical properties of CeO2 thin films |
|
| Photoelectrochemical (PEC) studies on CdSe thin films electrodeposited from non-aqueous bath on different substrates | |
|
Y G Gudage, N G Deshpande, A A Sagade, R P Sharma, S M
Pawar |
321 |
| * Film adhesion in amorphous silicon solar cells |
|
|
A R M Yusoff, M N Syahrul and K Henkel * This paper has been withdrawn by Bulletin of Materials Science as the editor has determined that the material presented in this paper is a complete copy of the material which has been published by other authors in other journals and reports.
|
329 |
| |
|
| Electrical Properties | |
|
A re-look at critical factors influencing single-phase formation of Ba2Ti9O20 microwave dielectrics |
|
| |
|
| Thermal Properties | |
|
Thermal decomposition of natural dolomite |
|
| Effect of nickel substitution on thermal properties of Na0×9CoO2 | |
|
J Meena Devi, N Gayathri, A Bharathi and K Ramachandran |
345 |
| |
|
| Single Crystals | |
|
Growth and characterization of pure and lithium doped strontium tartrate tetrahydrate crystals by solution–gel technique |
|
|
|
|
|
|
|
| Dielectric, elastic, anelastic and conductivity behaviour of ferroelectromagnetic composites, Ni0×5Zn0×5Fe1×95O4–d + Ba0×8Pb0×2TiO3 | |
|
N Ramamanohar Reddy, M Venkata Ramana, K Krishnaveni, K V Siva Kumar |
357 |
| |
|
| Polymers | |
| Macrovoids formation and light scattering of PMMA | |
|
Zhi Hong Chen, Z C Chang and C B Lin |
365 |
| Carbon nanotube reinforced polymer composites––A state of the art | |
|
S Bal and S S Samal |
379 |
| Selective absorption of water from different oil–water emulsions with Psy-cl-poly (AAm) synthesized using irradiation copolymerization method | |
|
B S Kaith and Kiran Kumar |
387 |
| |
|
| Alloys and Steels | |
| Separation of matrix alloy and reinforcement from aluminum metal matrix composites scrap by salt flux method | |
|
K R Ravi, R M Pillai, B C Pai and M Chakraborty |
393 |
| Ceramic coated Y1 magnesium alloy surfaces by microarc oxidation process for marine applications | |
|
V V Narulkar, S Prakash and K Chandra |
399 |
| Modelling of soft impingement during solidification | |
|
K T Kashyap and S Yamdagni |
403 |
| Structural phase transitions and piezoelectric anomalies in ordered Sc0×5Ga0×5N alloys | |
|
A M Alsaad and A A Ahmad |
407 |
| Interfacial microstructure and strength of diffusion brazed joint between Al2O3–TiC and 9Cr1MoV steel | |
|
Wang Juan, Li Yajiang and S A Gerasimov |
415 |
| |
|
| Coals | |
| XRD and FT–IR investigations of sub-bituminous Assam coals | |
|
Binoy K Saikia, R K Boruah and P K Gogoi |
421 |
View html for Contents