Bulletin of Materials Science
Volume 30, No. 2, April 2007
CONTENTS
Cover: TEM images of Te nanowires, HREM image of a single nanowire and SEM image of Te nanorods prepared in a mixture of [BMIM] [PF6], CTAB and NaBH4 at 200°C for 10 h. For details, see p. 181.
|
Alloys and Steels |
|
|
Effect of cold work and aging on mechanical properties of a copper bearing microalloyed HSLA-100 (GPT) steel |
|
| Studies on relative catalytic efficiencies of zinc and aluminium on nucleation of dispersed bismuth droplets | |
|
Sanjay Chaubey |
81 |
| |
|
|
Composites |
|
|
Synthesis, transport and dielectric properties of polyaniline/Co3O4 composites |
|
| |
|
| Ceramics | |
|
Production of boron carbide powder by carbothermal synthesis of gel material |
|
| Effect of sintering temperature on structural and electrical properties of gadolinium doped ceria (Ce0×9Gd0×1O1×95) | |
|
L D Jadhav, S H Pawar and M G Chourashiya |
97 |
| |
|
| Single Crystals | |
|
Piezoelectric properties of Sr3Ga2Ge4O14 single crystals |
|
| Thermal, FT–IR and SHG efficiency studies of L-arginine doped KDP crystals | |
|
K D Parikh, D J Dave, B B Parekh and M J Joshi |
105 |
| |
|
| Thin Films | |
|
CO2 gas sensitivity of sputtered zinc oxide thin films |
|
|
Study of annealing effects in In–Sb bilayer thin films |
|
| Synthesis of nanocrystalline CdS thin films in PVA matrix | |
|
R Devi, P Purkayastha, P K Kalita and B K Sarma |
123 |
| Ethanol vapour sensing properties of screen printed WO3 thick films | |
|
R S Khadayate, R B Waghulde, M G Wankhede, J V Sali and P P Patil |
129 |
| Electrical properties of chemically prepared nonstoichiometric CuIn(S,Se)2 thin films | |
|
R H Bari, L A Patil, A Soni and G S Okram |
|
| Studies on CdIn2O4 derived from CdIn2S4 prepared by flux method | |
|
L A Patil and M D Mahanubhav |
141 |
| Size dependent optical characteristics of chemically deposited nanostructured ZnS thin films | |
|
A U Ubale, V S Sangawar and D K Kulkarni |
147 |
| Structural and electrical properties of swift heavy ion beam irradiated Fe/Si interface | |
|
Chhagan Lal, R K Jain and I P Jain |
153 |
| |
|
| Mechno-chemical Synthesis | |
| Application of mechano-chemical synthesis for protective coating on steel grinding media prior to ball milling of copper | |
|
Indranil Lahiri and K Balasubramanian |
157 |
| |
|
| Polymers | |
| Structural characterization and thermally stimulated discharge conductivity (TSDC) study in polymer thin films | |
|
V S Sangawar, R J Dhokne, A U Ubale, P S Chikhalikar and S D Meshram |
163 |
| Study of d.c. electrical conductivity of paranitroaniline doped (1 : 1) polyvinylchloride and poly (methyl methacrylate) polyblends | |
|
R V Waghmare, N G Belsare, F C Raghuwanshi and S N Shilaskar |
167 |
| |
|
| Nanomaterials | |
| A facile synthesis of MInSe2 (M = Cu, Ag) via low temperature pyrolysis of single source molecular precursors, [(R3P)2MIn(SeCOAr)4] | |
|
Shamik Ghoshal, Liladhar B Kumbhare, Vimal K Jain and Gautam K Dey |
173 |
| Use of ionic liquids in synthesis of nanocrystals, nanorods and nanowires of elemental chalcogens | |
|
A Thirumurugan |
179 |
| Synthesis, characterization and gas sensitivity of MoO3 nanoparticles | |
|
Arnab Ganguly and Raji George |
183 |
| Generation and characterization of nano aluminium powder obtained through wire explosion process | |
|
T K Sindhu, R Sarathi and S R Chakravarthy |
187 |
View html for Contents