Bulletin of Materials Science
Volume. 22, January-December 1999
CONTENTS
Home - - Go Back - - Contents
|
Vol.22, No.1, February 1999 |
Pages |
| Crystallographic
data on axially compressed Kevlar 49 fibres — R. V. Iyer, Kalyani Vijayan,
K. Sooryanarayana and T. N. Guru Row |
|
| On the polar reciprocity model for hot deformation
characteristics of materials — S. V. S. Narayana Murty and B. Nageswara
Rao |
|
| High quality crystal growth and characterization of organic
nonlinear optical crystal: 4-dimethylamino-N-methyl-4-stilbazolium
tosylate (DAST)— Junko Yabuzaki, Yoshinori Takahashi, Hiroaki Adachi,
Yusuke Mori and Takatomo Sasaki |
|
| Effects
of anisotropy and annealing on microhardness of InBiTe single crystals
— G. R. Pandya, S. R. Bhavsar and P. H. Soni |
|
| High
temperature compression testing and determination of warm working temperatrue
for commerical purity aluminium — B. K. Rao, M. S. A. Khadar and K.
Srinivasan |
|
| Creep
activation energy of flow process in BiTeSe single crystals — C. F.
Desai, P. H. Soni and S. R. Bhavsar |
|
| Studies
on indentation fracture toughness on ceramic an ceramic composite using
acoustic emission technique — A. K. Ray, G. Das, N. K. Mukhopadhyay,
D. K. Bhattacharya, E. S. Dwarakadasa and N. Parida |
|
| Precipitation
hardening in Al-Zn-Mg-AlO(p) composite — K. S. Kiran and K. Srinivasan |
|
| Comparative study of zirconia-mullite and alumina zirconia
composites — N. C. Biswas and S. P. Chaudhuri |
|
| Microstructural
and electrical characteristics of SiO2 doped ZnOBiO3 Varistors
— R. Goel, A. Sil and H. R. Anand |
|
| Pyroelectricity
in calcium substituted sodium bismuth titanate layer structured ferroelectric
ceramics — P. S. Rama Sastry, G. S. Kumar, T. Bhimasankaram and G.
Prasad |
|
| Powder
XRD investigations on hydrocarbon mixtures — P. B. Shashikanth and
P. B. V. Prasad |
|
|
Vol.22,
No.2, April 1999
|
|
| SO
solid state gas sensors: A review — K. Singh and S. S. Bhoga |
|
| Recovery
characteristics of optical hydrogen sensor using Pd thin film: Behaviour
of three-stage hydrogen desorption — Yoshiki Okuhara and Massasuke
Takata |
|
| Influence
of metal particles on the reduction properties of ceria based materials
studied by TPR — G. Ranga Rao |
|
| Comparative
study of adatom induced relaxations and energies for Si, Ge and carbon
adsorption on a (2*1)Si(001) surface — U. P. Wad, A. V. Limaye, M.
P. Gokhale, and S. B. Ogale |
|
| X-ray
studies on microstructural characterization of tantalum substitued
tungsten mixed molybdenum diselenide — Debashis Palit, S. K. Srivastava
and B. K. Samantay Ray |
|
| Open
and shrot circuit themally stimulated currents in ethyl cellulose (EC)
polymethyl methacrylate (PMMA) blend — P. K. Khare, J. M. Keller and
S. C. Datt |
|
| Effect
of hydroxyl content on the physical properties of calcium metaphosphate
glasses — B. Karmakar, P. Kundu, Anup K. Chaudhuri, K. Annapurna, A.
Kumar and R. N. Dwivedi |
|
| Rare
earth fluorescence in NASICON type phosphate glass NaTiZnPO12
— G. Vijayaprakash, P. nachimuthu, M. Vithal and R. Jagannathan |
|
| Microscopic
order parameter of two nematogenic compounds using X-rays — A. P. Divya,
D. Revannasiddaiah, R. Somashekar and M. S. Madhava |
|
| Design
and fabrication of liquid phase epitaxy system — R. Venkataraghavan,
N. K. Udayashankar, Blasius Victor Rodrigues, K. S. R. K. Rao and H.
L. Bhat |
|
|
Vol.
22, No. 3, May 1999
|
|
| Foreword |
|
| Porous materials: A case study of supramolecular organization
in materials design — C. N. R. Rao |
|
| Materials response to high pressures — R. Chidambaram and
Surinder M. Sharma |
|
| Novel synthesis methods for new materials in solid state
chemistry — J. Etourneau |
|
| Disordering and reordering of mechanically milled superlattice alloys — Robert W. Cahn | |
| In situ TEM observation of spontaneous alloying in nanometer sized particles — H. Mori and H. Yasuda | |
| Friction and wear properties of quasi periodic material coatings — C. I. lang, D. Shechtman and E. Gonzalez | |
| Soft solution processing in situ fabrication of morphology controlled advanced ceramic materials in low temperature solutions without firing — Masahiro Yoshimura, Kyoo Seung Han and Wojciech Suchanek | |
| Sol-gel synthesis of hybrid materials — J. Livage | |
| A high potential material zirconia — S. Somiya and T. Akiba | |
| Mixed plutonium uranium carbide fuel in fast breeder test reactor — P. Rodriguez | |
| Sol-emulsion-gel synthesis of ceramic particles — D. Ganguli | |
| Direct observation of the interaction between vortices and dislocations in superconducting crystals by a cryo-Lorentz EM — Shigeo Horiuchi, Marco Cantoni, Tadamasa Tsuruta and Yoshio Matsui | |
| Microstructure controls and their effects on the properties of BiSrCaCuO4 superconductors — K. Togano, H. Kumakura, H. Kitaguchi, H. Fujii, H. Miao, Y. Hishinuma, Y. Nemoto, J. Sato and T. Hasegawa | |
| MOCVD grown homoepitaxial YBa2Cu3Ox thin films and its multilayers — H. Zama, N. Tanaka and T. Morishita | |
| Novel ceramic substrates for high Tc superconductors — Asha M. John, P. K. Sajith, J. James, S. P. Pai and R. Pinto | |
| Noise properties of swift heavy ion irradiated epitaxial thin films of YBCO — S. K. Arora, Ravi Kumar, D. Kanjilal, G. K. Mehta, S. Khatua, R. Pinto and A. K. Gupta | |
| Superconducting and non-superconducting PrBa2Cu3O7 — Y. Nishihara, Z. Zou, J. Ye, K. Oka and H. Bando | |
| Study of the impact of HgO addition and low field magnetic relaxation behaviour in granular high Tc superconductors — R. G. Sharma, S. Lahiry, A. Pandey and Dipten Bhattacharya | |
| Evidence for supercooling across a vortex-matter phase transition:
studies on CeRu2 and Bi2Sr2CaCu2O8 — P Chaddah and S B Roy |
|
|
Synthesis and properties of novel materials at high pressure and temperature-molecular dynamics simulation studies — S. L. Chaplot |
|
| High-pressure high-temperature transitions in nanocrystalline yA!2O3, yFe2O3 and TiO2 — S. N. Vaidya | |
| Materials synthesis and phase transitions under shock waves — Satish C. Gupta | |
| Properties of solids under high pressure-An electronic band structure approach — R. Asokamani and C. Ravi | |
| Non-covalent chiral fibres in aqueous gels and their functionalization
— Jiirgen-Hinrich Fuhrhop,Sonke
Svenson, Christoph Bottcher, Otto Trager, Corinna Demoulin, Peter Schnieder, Christian Messerschmidt, Laurent Ruhlmann and Jorg Zimmermann |
|
| Forces between colloidal droplets in the presence of a weak polyelectrolyte — John Philip, O. Mondain Monval, F. Leal-Calderon and J. Bibette | |
| Alloying behaviour in nanocrystalline materials during mechanical alloying — S. K. Pabi, I Manna and B. S. Murty | |
| Mono-dispersed single-wall carbon nanotubes formed in channels
of zeolite crystal: Production, optical and electrical transport properties
— Z. K. Tang, H. D. Sun, J. Wang, J. Chen and G. Li |
|
| A novel chemical route for the preparation of nanosized oxides,
phosphates, vanadates, molybdates and tungstates using polymer precursors
— P. Pramanik |
|
| Size quantization effects in optical and electrical properties
of II-VI semiconductor films in nanocrystalline form — A. K. Pal |
|
| Modeling of diffusion and oxidation in two dimensions during silicon device processing — P. K. Singh and B. K. Das | |
| Heteroepitaxial growth of III-V compound semiconductors for optoelectronic devices — T. Egawa, H. Ishikawa, T. Jimbo and M. Umeno | |
| Isotope energy shift of luminescence in hydrogen- and deuterium-terminated porous silicon — T. Matsumoto, S. V. Nair and Y. Masumoto | |
| Optical properties of tetragonal germanium nanocrystals deposited by the cluster-beam evaporation technique: New light emitting material for future — S Nozaki, S Sato, S Rath, H Ono and H Morisaki | |
| Rapid processing of low-cost, high-efficiency silicon solar cells — A. Rohatgi, P. Doshi, A. Ebong, S. Narasimha, T. Krygowski and J. Moschner | |
| Enhanced formation of low-resistivity TiSi2 contacts for deep submicron devices — L. J. Chen, S. L. Cheng and S. M. Chang | |
| Photonic Materials and Nonlinear Optical Materials Development of new NLO borate crystals — Y. Mori and T. Sasaki | |
| Quasi-phase-matched second harmonic generation device in
Mg-doped LiNbO3 and its application to high-density optical disk system — Y. Kitaoka, K. Mizuuchi, T. Yokoyama, K. Yamamoto, K. Narumi and M. Kato |
|
| Periodically domain-inverted LiNbO3 for waveguide quasi-phase
matched nonlinear optic wavelength conversion devices — M. Fujimura, T. Suhara and H. Nishihara |
|
| Linear
and nonlinear optical properties of organic crystals: MBANP and its
derivatives — R. T. Bailey, F. R. Cruickshank, S. Lochran, D. Pugh,
J. N. Sherwood, P. J. Langle and J. D. Wallis |
|
| Growth
and characterization of new oxide and fluoride crystals for optical
applications — K. Shimamura, S. L. Baldochi, Na Mujilatu, K. Nakano and
T. Fukuda |
|
| Second-harmonic generation in distributed feedback ferroelectric
liquid crystal cells — H. Hoshi, D-H Chung, K. Ishikawa and H. Takezoe
|
|
| Photoinduced fabrication of complex surface relief structures
on azobenzene functionalized polymers — J. Kumar, L. Lal, Nirmal K.
Viswanathan,S. Bian, S. Balasubramanian, D. Y. Kim and S. K. Tripathy
|
|
| Influence of counter ion on polyaniline and polypyrrole —
D. C. Trivedi |
|
| Some new structural and electronic characteristics of quasicrystals —
O. N. Srivastava, R. S. Tiwari,N. P. Lalla, R. K. Mandal and M. A.
Shaz |
|
| Structure and tribological property of B2-based approximants — Chuang Dong, Li-Ming Zhang, Qing-Gang Zhou, Hui-Chen Zhang, Jean-Marie Dubois, Qiu-Hua Zhang, Yao-Chun Fu, Fei-Zhou He and Fei Ge | |
| Electron microscopy study of striation contrast in Al-Cu-Co-Si
decagonal quasicrystals — N. K. Mukhopadhyay, G. V. S. Sastry and
G. C. Weatherly |
|
| Interfaces in icosahedrally related structures: problems
and prospects — R. K. Mandal |
|
| Contributions of muon spin rotation/relaxation/resonance
to the understanding of problems in magnetism-Current and future —
K. Nagamine |
|
| Nanocrystalline materials for high temperature soft magnetic
applications: A current prospectus — M. E. McHenry, M. A. Willard,
H. Iwanabe, R. A. Sutton, Z. Turgut, A. Hsiao and D. E. Laughl |
|
| Evidence for selective resputtering as the growth mechanism
of pair-order anisotropy in amorphous TbFe films — Vincent G Harris
and Taras Pokhil |
|
| Recent advances in 2: 17 and 3 : 29 permanent magnet materials — K.
V. S. Rama Rao, G. Markandeyulu, K. G. Suresh, V. R. Shah, U. V. Varadaraju,
M. Venkatesan, M. Q. Huang, K. Sirisha, M. E. McHenry and V. G. Harris
|
|
|
Self-organized growth of In(Ga)As/GaAs quantum dots and their opto-electronic device applications — P. Bhattacharya, K. Kamath, J. Phillips and D. Klotzkin |
|
| Quantum dots fabricated by selective area MOVPE and their
application to single electron devices —Takashi Fukui, F. Nakajima,
K. Kumakura and J. Motohisa |
|
| Self-assembled quantum dots: The route to novel optical,
electronic, magnetic and superconducting properties — S. Bandyopadhyay
|
|
| InGaAs quantum disk: Fabrication via self-organization and
spectroscopies — H. Kamada, J. Temmyo, E. Kuramochi, H. Ando and T.
Tamamura |
|
| Chemical bond manipulation for nanostructure integration on wafer scale — K. Prabhakaran and T. Ogino | |
| Semiconductor quantum dots: Theory and phenomenology — Vijay A. Singh,V. Ranjan and Manish Kapoor | |
| Environmental effects in iron aluminides —
R. Balasubramaniam |
|
| Evolution and stability of texture during thermomechanical
processing of Ti-24Al-llNb alloy — Satyam Suwas and R. K. Ray |
|
| Microstructures in Al-rich y-TiAl strained in the domain
of temperature of flow stress anomalies — Fabienne Gregori and Patrick Veyssiere
|
|
| Novel oxygen sensor using hot spot on ceramic rod — M. Takata, Y. Noguchi, Y. Kurihara, T. Okamoto and B. Huybrechts | |
| Characterization of thin films using heavy ion beams —
H. Timmers, R. G. Elliman
and T. R. Ophel |
|
| X-ray photoelectron spectroscopy: A powerful tool for a better characterization of thin film materials — A. Levasseur, P. Vinatier and D. Gonbeau | |
| Effect of etchant concentration and defects on pyramid formation
in TMAH etched silicon — W. K. Choi, J. T. L. Thong, Y. Bai, Puneet Newaskar
and P. Luo |
|
| Synthesis and characterization of surface-modified and organic-functionalized MCM-41 type ordered mesoporous materials — S. C. Laha, P. Mukherjee and R. Kumar | |
| Key factors in tissue engineering —Yoshito Ikada |
|
| Role of platelets in blood-biomaterial interactions —
G. H. R. Rao and Thomas
Chandy |
|
| Hybrid bioceramics with metals and polymers for better biomaterials
— T. Kameyama
|
|
| On the relevance and requirements of biomaterials —
R. Sivakumar |
|
| Composite materials for aerospace applications —
P. D. Mangalgiri
|
|
| Interfacial energy issues in ceramic particulate reinforced
metal matrix composites — Brij K. Dhindaw |
|
| Transient thermal process induced by swift heavy ions: Defect annealing and defect creation in Fe and Ni — Ch. Dufour, Z. G. Wang, E. Paumier and M. Toulemonde | |
| Modifications induced by swift heavy ions — C. Trautmann | |
| Analytical techniques with a cyclotron on polymers — M. P.
De Jong, M. J. A. De Voigt,L. J. van Ijzendoorn and H. H. Brongersma
|
|
| Structural investigation of polydiacetylenes: A variable
temperature solid state 13C CP/MAS NMR study Ashok L. Cholli and Daniel
J. Sandman |
|
| In situ TEM observation of long range ordering via short
range order in Cu3Pt — N. Kuwano, N. Chiwata and K. Oki |
|
| High resolution electron microscopy of alloys G. K. Dey and S. Banerjee | |
| Study of diffusion and related phenomena by electron probe microanalyser — K. Bhanumurthy and G. B. Kale | |
| Micro-parameters and micro-characteristics related to the
formation of £-martensite in Fe-based shape memory alloys —
Bohong Jiang and
Xuan Qi |
|
| Creation and motion of dislocations and fracture in metal and silicon crystals — Masao Doyama | |
| Device simulation and fabrication of field effect solar cells — Kaori Miyazaki, Nobuyuki Matsuki,Hiroyuki Shinno, Hiroshi Fujioka, Masaharu Oshima and Hideomi Koinuma | |
| Can ab initio simulation really predict properties of materials prior to actually carrying out the experiments? — Yoshiyuki Kawazoe | |
|
Vol.
22, No. 4, June 1999
|
|
| System Cu-Rh-O: Phase diagram and thermodynamic properties of ternary oxides CuRhO2 — K. T. Jacob, T. H. Okabe, T. Uda and Y. Waseda | |
| Mossbauer and XRD studies on the effect of doping iron in KCaY (PO4)2 — T. N. Sairam, G. V. Narasimha Rao and B. Viswanathan | |
| Studies of structural and dielectric properties of BasBiTi3Nb7O3o ceramics — H. Sharma, Kiran Kumari and S. N. Giri | |
| GMR in Ni/Cu multilayers: an electronic structure study — S. K. Ghosh, H. G. Salunke, G. P. Das, A. K Grover and M. K .Totlani | |
| Microstructure and magnetic properties of zinc ferrite thin films produced by pulsed laser deposition — D. Ravinder | |
| Oxidation of MoSi2 and MoSi2-based materials Sheela — K. Ramasesha and K. Shobu | |
| Electrochemical synthesis of Tl-based high Tc single-phase superconductor thin films — L. A. Ekal, N. V. Desai and S. H. Pawar | |
|
Electrical
properties of SiO2-doped sodium metavanadate sintered discs —
B. V. Bahuguna
Saradhi, G. Prasad, G. S. Kumar and T. Bhimasankaram
|
|
| A matrix isolation FTIR investigation of laser-ablated uranium oxide in argon and nitrogen matrices — K. Sankaran, K. Sundararajan and K. S. Viswanathan | |
| I2C5+ radiation effects in SR-86 track recording polymer
— H. S. Virk,
G. S. Randhawa, R. Thangaraj, D. K. Avasthi and K. Asokan |
|
| Studies on the ion-beam modifications in ethylene diamine sulphate — E. Venkateshwar Rao and M. Ramakrishna Murthy | |
| Effect of addition of polycarbonate on sheared flow of red mud-filled isotactic polypropylene Navin Chand and S A R Hashmi | |
| Macrocrystalline parameters in native and acid-modified starches — H. Somashekarappa,R. Somashekar, Vasudeva Singh and S. Z. Ali | |
| Characterization of reinforced syntactic foams using ultrasonic imaging technique — C. S. Karthikeyan, C. R. L. Murthy, S. Sankaran and Kishore | |
| Nucleation studies in supersaturated aqueous solutions of KH2P04 doped with KBr and K2Cr207 — C. Mahadevan, G. Janiland Angel, V. Anton Sophana and V. Umayorubhagan | |
| Nucleation studies in supersaturated aqueous solutions of urea and thiourea doped with inorganic dopants — J. M. Kavitha, K. Seethalakshmi, C. Mahadevan and Y. Premila Rachelin | |
|
Vol.
22, No. 5, August 1999
|
|
| Foreword | |
| Computer modelling and simulation in materials science — N. Ramakrishnan and P. Ramarao | |
| Crystal growth study using combination of molecular dynamics and Monte Carlo methods — Masao Doyama | |
| Computer simulation studies of Ar clusters — P. Padma Kumar and K. J. Rao | |
| Integrated computational chemistry system for catalysts design — S. Salai Cheettu Ammal, Seiichi Takami, Momoji Kubo and Akira Miyamoto | |
| The ubiquitous icosahedral Bi2 in boron chemistry — E. D. Jemmis and M. M. Balakrishnarajan | |
| A novel a-Si: H solar cell designed by two-dimensional device simulation — Kaori Miyazaki, Hiroshi Fujioka, Masaharu Oshima and Hideomi Koinuma | |
| Calculation of friction coefficient of a solid-liquid interface
via a non-equilibrium molecular dynamics simulation — Sundaram Balasubramanian and Christopher J. Mundy |
|
| Computational condensed matter physics — B. K. Godwal | |
| Design of hydrogen storage alloys with the aid of molecular orbital method — H. Yukawa, M. Takagi and M. Morinaga | |
| Numerical simulations of fracture initiation in ductile solids under model, dynamic loading — R. Narasimhan and S. Basu | |
| Can ab initio simulation really predict properties of materials prior to experimental — Yoshiyuki Kawazoe | |
| Chitin and chitosan fibres: A review — M. N. V. Ravi Kumar |
|
| Magnetization and initial permeability studies of Nd3+ substituted Zn-Mg ferrite system — B. P. Ladgaonkar, C. B. Kolekar and A. S. Vaingankar | |
| Optical and electrical properties of zinc oxide films prepared by spray pyrolysis — Benny Joseph, K. G. Gopchandran, P. K. Manoj, Peter Koshy and V. K. Vaidyan | |
| Photoelectrochemical investigation on spray deposited n-CdIn2S4 thin films — K. Y. Rajpure, V. L. Mathe and C. H. Bhosale | |
| Fatigue crack growth behaviour of gamma base titanium aluminides under different loading conditions — R. Gnanamoorthy and Y. Mutoh | |
|
Vol
22, No. 6, October 1999
|
|
| A study of orthorhombic phases in aluminium-transition metal alloys — T. R. Anantharaman | |
| Transmission electron microscopy and X-ray diffraction studies of quantum wells — D. V. Sridhara Rao, K. Muraleedharan, G. K. Dey, S. K. Haider, G. Bhagavannarayan, P. Banerji, D. Pal and D. N. Bose | |
| Thickness dependent electrical properties of CdO thin films prepared by spray pyrolysis method — L. C. S. Murthy and K. S. R. K. Rao | |
| Distribution of lead in lead-containing aluminium alloys obtained by liquid phase co-spray forming technique — Yu. Fuxiao, E. S. Dwarakadasa and S. Ranganathan | |
| Synthesis and characterization of Eu3+ activated hexagonal ABaGd(PO4)2 (A+ = Li, Na, or K) phosphates — A. M. Band, S. J. Dhoble and R. B. Pode | |
| Crystal growth of cesium triborate, CsB3O5 by Kyropoulos technique — Yoshio Kagebayashi, Yusuke Mori and Takatomo Sasaki | |
| Ferroelectric phase transition inteasRTisNbyOso [R = Nd, Eu, Gd] ceramics — R. N. P. Choudhary, S. R. Shannigrahi and A. K. Singh | |
| Vacancy-induced electronic states in substoichiometric thin
films and powders-A soft X-ray emission study — B. S. Acharya, Rajeev,
L. D. Pradhan, B. B. Nayak and Pushparani Mishra |
|
| Structural and magnetic study of nitrided Co74Fe8B]2Si6 and Co74Fe4Mn4Bi2Si6 ribbons — F Kail, H. Atmani, L. Chahed and N. Larguet | |
| Magnetic properties of nanocomposites of mixed oxides of
iron and chromium synthesized under different oxidative environments
— Rashi Mathur, D. R. Sharma, S. R. Vadera and N. Kumar |
|
| Influence of phase transformation in Pd hydride on the recovery characteristics of optical hydrogen sensors — Y. Okuhara, Y. Imai, Y. Noguchi and M. Takata | |
| Investigation of electrical conduction in poly vinyl formal
— P. K. Khare, R. K.
Pandey and P. L. Jain |
|
| Dynamics of impact of sphere on flat surfaces of polymer matrix composites — Manish Roy | |
|
Vol.
22, No. 7, December 1999
|
|
| Decomposition behaviour of Kevlar 49 fibres: Part I — R. V. Iyer and Kalyani Yijayan | |
| Silica fibre-composites obtained using long-chain carboxylic acid as templates — L. Sudheendra and A. R. Raju | |
| Effect of corrosive medium on fatigue crack growth behaviour and fracture in high martensite dual phase steel — K. V. Sudhakar, Asim Bag, E. S. Dwarakadasa and K. K. Ray | |
| Study on steel corrosion in different seabed sediments — Yantao Li and Baorong Hou | |
| Simulation Studies of Materials On the specific heat of Al-Si
and Al-Ge alloys-A simulation study — P. Murugan and K. Ramachandran |
|
| Effect of CuO addition in Bi-Sr-Ca-Cu-0 and Y-Ba-Cu-O ceramics
— D. R. Mishra and P. N. Dheer |
|
| Optical properties of (1 - x - y)B2O3-xLi2O-yMCl2 (M = Cd, Zn) glasses —P. S. Vijoy and M. Abdul Khadar | |
| Microhardness study of(l-x-y)(B2O3)-.x(Li2O)-y(MCl2),
(M = Cd, Zn) glasses — P. S. Vijoy,M. Abdul Khadar and Cyriac Joseph |
|
| Thermal treatment of the precipitated solid material (PSM)
from the waste black liquor (WBL) —A. M. A. Nada, E. M. A. Hamzawy,
H. I. Omara and S. E. Gohary |
|
| Subject index | |
| Author index |